- Generated by
1.11.0
|
HyperDbg Debugger
|
HyperDbg's SDK Error codes. More...
Go to the source code of this file.
Macros | |
| #define | DEBUGGER_OPERATION_WAS_SUCCESSFUL 0xFFFFFFFF |
| General value to indicate that the operation or request was successful. | |
| #define | DEBUGGER_ERROR_TAG_NOT_EXISTS 0xc0000000 |
| error, the tag not exist | |
| #define | DEBUGGER_ERROR_INVALID_ACTION_TYPE 0xc0000001 |
| error, invalid type of action | |
| #define | DEBUGGER_ERROR_ACTION_BUFFER_SIZE_IS_ZERO 0xc0000002 |
| error, the action buffer size is invalid | |
| #define | DEBUGGER_ERROR_EVENT_TYPE_IS_INVALID 0xc0000003 |
| error, the event type is unknown | |
| #define | DEBUGGER_ERROR_UNABLE_TO_CREATE_EVENT 0xc0000004 |
| error, enable to create event | |
| #define | DEBUGGER_ERROR_INVALID_ADDRESS 0xc0000005 |
| error, invalid address specified for debugger | |
| #define | DEBUGGER_ERROR_INVALID_CORE_ID 0xc0000006 |
| error, the core id is invalid | |
| #define | DEBUGGER_ERROR_EXCEPTION_INDEX_EXCEED_FIRST_32_ENTRIES 0xc0000007 |
| error, the index is greater than 32 in !exception command | |
| #define | DEBUGGER_ERROR_INTERRUPT_INDEX_IS_NOT_VALID 0xc0000008 |
| error, the index for !interrupt command is not between 32 to 256 | |
| #define | DEBUGGER_ERROR_UNABLE_TO_HIDE_OR_UNHIDE_DEBUGGER 0xc0000009 |
| error, unable to hide the debugger and enter to transparent-mode | |
| #define | DEBUGGER_ERROR_DEBUGGER_ALREADY_UHIDE 0xc000000a |
| error, the debugger is already in transparent-mode | |
| #define | DEBUGGER_ERROR_EDIT_MEMORY_STATUS_INVALID_PARAMETER 0xc000000b |
| error, invalid parameters in !e* e* commands | |
| #define | DEBUGGER_ERROR_EDIT_MEMORY_STATUS_INVALID_ADDRESS_BASED_ON_CURRENT_PROCESS 0xc000000c |
| error, an invalid address is specified based on current cr3 in !e* or e* commands | |
| #define | DEBUGGER_ERROR_EDIT_MEMORY_STATUS_INVALID_ADDRESS_BASED_ON_OTHER_PROCESS 0xc000000d |
| error, an invalid address is specified based on anotehr process's cr3 in !e* or e* commands | |
| #define | DEBUGGER_ERROR_MODIFY_EVENTS_INVALID_TAG 0xc000000e |
| error, invalid tag for 'events' command (tag id is unknown for kernel) | |
| #define | DEBUGGER_ERROR_MODIFY_EVENTS_INVALID_TYPE_OF_ACTION 0xc000000f |
| error, type of action (enable/disable/clear) is wrong | |
| #define | DEBUGGER_ERROR_STEPPING_INVALID_PARAMETER 0xc0000010 |
| error, invalid parameters steppings actions | |
| #define | DEBUGGER_ERROR_STEPPINGS_EITHER_THREAD_NOT_FOUND_OR_DISABLED 0xc0000011 |
| error, thread is invalid (not found) or disabled in stepping (step-in & step-out) requests | |
| #define | DEBUGGER_ERROR_PREPARING_DEBUGGEE_INVALID_BAUDRATE 0xc0000012 |
| error, baud rate is invalid | |
| #define | DEBUGGER_ERROR_PREPARING_DEBUGGEE_INVALID_SERIAL_PORT 0xc0000013 |
| error, serial port address is invalid | |
| #define | DEBUGGER_ERROR_PREPARING_DEBUGGEE_INVALID_CORE_IN_REMOTE_DEBUGGE 0xc0000014 |
| error, invalid core selected in changing core in remote debuggee | |
| #define | DEBUGGER_ERROR_PREPARING_DEBUGGEE_UNABLE_TO_SWITCH_TO_NEW_PROCESS 0xc0000015 |
| error, invalid process selected in changing process in remote debuggee | |
| #define | DEBUGGER_ERROR_PREPARING_DEBUGGEE_TO_RUN_SCRIPT 0xc0000016 |
| error, unable to run script in remote debuggee | |
| #define | DEBUGGER_ERROR_INVALID_REGISTER_NUMBER 0xc0000017 |
| error, invalid register number | |
| #define | DEBUGGER_ERROR_MAXIMUM_BREAKPOINT_WITHOUT_CONTINUE 0xc0000018 |
| error, maximum pools were used without continuing debuggee | |
| #define | DEBUGGER_ERROR_BREAKPOINT_ALREADY_EXISTS_ON_THE_ADDRESS 0xc0000019 |
| error, breakpoint already exists on the target address | |
| #define | DEBUGGER_ERROR_BREAKPOINT_ID_NOT_FOUND 0xc000001a |
| error, breakpoint id not found | |
| #define | DEBUGGER_ERROR_BREAKPOINT_ALREADY_DISABLED 0xc000001b |
| error, breakpoint already disabled | |
| #define | DEBUGGER_ERROR_BREAKPOINT_ALREADY_ENABLED 0xc000001c |
| error, breakpoint already enabled | |
| #define | DEBUGGER_ERROR_MEMORY_TYPE_INVALID 0xc000001d |
| error, memory type is invalid | |
| #define | DEBUGGER_ERROR_INVALID_PROCESS_ID 0xc000001e |
| error, the process id is invalid | |
| #define | DEBUGGER_ERROR_EVENT_IS_NOT_APPLIED 0xc000001f |
| error, for event specific reasons the event is not applied | |
| #define | DEBUGGER_ERROR_DETAILS_OR_SWITCH_PROCESS_INVALID_PARAMETER 0xc0000020 |
| error, for process switch or process details, invalid parameter | |
| #define | DEBUGGER_ERROR_DETAILS_OR_SWITCH_THREAD_INVALID_PARAMETER 0xc0000021 |
| error, for thread switch or thread details, invalid parameter | |
| #define | DEBUGGER_ERROR_MAXIMUM_BREAKPOINT_FOR_A_SINGLE_PAGE_IS_HIT 0xc0000022 |
| error, maximum breakpoint for a single page is hit | |
| #define | DEBUGGER_ERROR_PRE_ALLOCATED_BUFFER_IS_EMPTY 0xc0000023 |
| error, there is no pre-allocated buffer | |
| #define | DEBUGGER_ERROR_EPT_COULD_NOT_SPLIT_THE_LARGE_PAGE_TO_4KB_PAGES 0xc0000024 |
| error, in the EPT handler, it could not split the 2MB pages to 512 entries of 4 KB pages | |
| #define | DEBUGGER_ERROR_EPT_FAILED_TO_GET_PML1_ENTRY_OF_TARGET_ADDRESS 0xc0000025 |
| error, failed to get PML1 entry of the target address | |
| #define | DEBUGGER_ERROR_EPT_MULTIPLE_HOOKS_IN_A_SINGLE_PAGE 0xc0000026 |
| error, multiple EPT Hooks or Monitors are applied on a single page | |
| #define | DEBUGGER_ERROR_COULD_NOT_BUILD_THE_EPT_HOOK 0xc0000027 |
| error, could not build the EPT Hook | |
| #define | DEBUGGER_ERROR_COULD_NOT_FIND_ALLOCATION_TYPE 0xc0000028 |
| error, could not find the type of allocation | |
| #define | DEBUGGER_ERROR_INVALID_TEST_QUERY_INDEX 0xc0000029 |
| error, could not find the index of test query | |
| #define | DEBUGGER_ERROR_UNABLE_TO_ATTACH_TO_TARGET_USER_MODE_PROCESS 0xc000002a |
| error, failed to attach to the target user-mode process | |
| #define | DEBUGGER_ERROR_UNABLE_TO_REMOVE_HOOKS_ENTRYPOINT_NOT_REACHED 0xc000002b |
| error, failed to remove hooks as entrypoint is not reached yet | |
| #define | DEBUGGER_ERROR_UNABLE_TO_REMOVE_HOOKS 0xc000002c |
| error, could not remove the previous hook | |
| #define | DEBUGGER_ERROR_FUNCTIONS_FOR_INITIALIZING_PEB_ADDRESSES_ARE_NOT_INITIALIZED 0xc000002d |
| error, the needed routines for debugging is not initialized | |
| #define | DEBUGGER_ERROR_UNABLE_TO_DETECT_32_BIT_OR_64_BIT_PROCESS 0xc000002e |
| error, unable to get 32-bit or 64-bit of the target process | |
| #define | DEBUGGER_ERROR_UNABLE_TO_KILL_THE_PROCESS 0xc000002f |
| error, unable to kill the target process | |
| #define | DEBUGGER_ERROR_INVALID_THREAD_DEBUGGING_TOKEN 0xc0000030 |
| error, invalid thread debugging token | |
| #define | DEBUGGER_ERROR_UNABLE_TO_PAUSE_THE_PROCESS_THREADS 0xc0000031 |
| error, unable to pause the process's threads | |
| #define | DEBUGGER_ERROR_UNABLE_TO_ATTACH_TO_AN_ALREADY_ATTACHED_PROCESS 0xc0000032 |
| error, user debugger already attached to this process | |
| #define | DEBUGGER_ERROR_THE_USER_DEBUGGER_NOT_ATTACHED_TO_THE_PROCESS 0xc0000033 |
| error, the user debugger is not attached to the target process | |
| #define | DEBUGGER_ERROR_UNABLE_TO_DETACH_AS_THERE_ARE_PAUSED_THREADS 0xc0000034 |
| error, cannot detach from the process as there are paused threads | |
| #define | DEBUGGER_ERROR_UNABLE_TO_SWITCH_PROCESS_ID_OR_THREAD_ID_IS_INVALID 0xc0000035 |
| error, cannot switch to new thread as the process id or thread id is not found | |
| #define | DEBUGGER_ERROR_UNABLE_TO_SWITCH_THERE_IS_NO_THREAD_ON_THE_PROCESS 0xc0000036 |
| error, cannot switch to new thread the process doesn't contain an active thread | |
| #define | DEBUGGER_ERROR_UNABLE_TO_GET_MODULES_OF_THE_PROCESS 0xc0000037 |
| error, unable to get modules | |
| #define | DEBUGGER_ERROR_UNABLE_TO_GET_CALLSTACK 0xc0000038 |
| error, unable to get the callstack | |
| #define | DEBUGGER_ERROR_UNABLE_TO_QUERY_COUNT_OF_PROCESSES_OR_THREADS 0xc0000039 |
| error, unable to query count of processes or threads | |
| #define | DEBUGGER_ERROR_USING_SHORT_CIRCUITING_EVENT_WITH_POST_EVENT_MODE_IS_FORBIDDEDN 0xc000003a |
| error, using short-circuiting event with post-event mode is not supported in HyperDbg | |
| #define | DEBUGGER_ERROR_UNKNOWN_TEST_QUERY_RECEIVED 0xc000003b |
| error, unknown test query is received | |
| #define | DEBUGGER_ERROR_READING_MEMORY_INVALID_PARAMETER 0xc000003c |
| error, for reading from memory in case of invalid parameters | |
| #define | DEBUGGER_ERROR_THE_TRAP_FLAG_LIST_IS_FULL 0xc000003d |
| error, the list of threads/process trap flag is full | |
| #define | DEBUGGER_ERROR_UNABLE_TO_KILL_THE_PROCESS_DOES_NOT_EXISTS 0xc000003e |
| error, unable to kill the target process. process does not exists | |
| #define | DEBUGGER_ERROR_MODE_EXECUTION_IS_INVALID 0xc000003f |
| error, the execution mode is incorrect | |
| #define | DEBUGGER_ERROR_PROCESS_ID_CANNOT_BE_SPECIFIED_WHILE_APPLYING_EVENT_FROM_VMX_ROOT_MODE 0xc0000040 |
| error, the process id cannot be specified while the debugger is in VMX-root mode | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_PREALLOCATED_BUFFER_IS_NOT_ENOUGH_FOR_EVENT_AND_CONDITIONALS 0xc0000041 |
| error, the preallocated buffer is not enough for storing event+conditional buffer | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_REGULAR_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000042 |
| error, the regular preallocated buffer not found | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_BIG_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000043 |
| error, the big preallocated buffer not found | |
| #define | DEBUGGER_ERROR_UNABLE_TO_CREATE_ACTION_CANNOT_ALLOCATE_BUFFER 0xc0000044 |
| error, enable to create action (cannot allocate buffer) | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_ACTION_REGULAR_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000045 |
| error, the regular preallocated buffer not found (for action) | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_ACTION_BIG_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000046 |
| error, the big preallocated buffer not found (for action) | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_PREALLOCATED_BUFFER_IS_NOT_ENOUGH_FOR_ACTION_BUFFER 0xc0000047 |
| error, the preallocated buffer is not enough for storing action buffer | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_REQUESTED_OPTIONAL_BUFFER_IS_BIGGER_THAN_DEBUGGERS_SEND_RECEIVE_STACK 0xc0000048 |
| error, the requested optional buffer is bigger than send/receive stack of the debugger | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_REGULAR_REQUESTED_SAFE_BUFFER_NOT_FOUND 0xc0000049 |
| error, the requested safe buffer does not exist (regular) | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_BIG_REQUESTED_SAFE_BUFFER_NOT_FOUND 0xc000004a |
| error, the requested safe buffer does not exists (big) | |
| #define | DEBUGGER_ERROR_INSTANT_EVENT_PREALLOCATED_BUFFER_IS_NOT_ENOUGH_FOR_REQUESTED_SAFE_BUFFER 0xc000004b |
| error, the preallocated buffer is not enough for storing safe requested buffer | |
| #define | DEBUGGER_ERROR_UNABLE_TO_ALLOCATE_REQUESTED_SAFE_BUFFER 0xc000004c |
| error, enable to create requested safe buffer (cannot allocate buffer) | |
| #define | DEBUGGER_ERROR_COULD_NOT_FIND_PREACTIVATION_TYPE 0xc000004d |
| error, could not find the type of preactivation | |
| #define | DEBUGGER_ERROR_THE_MODE_EXEC_TRAP_IS_NOT_INITIALIZED 0xc000004e |
| error, the mode exec trap is not already initialized | |
| #define | DEBUGGER_ERROR_THE_TARGET_EVENT_IS_DISABLED_BUT_CANNOT_BE_CLEARED_PRIRITY_BUFFER_IS_FULL 0xc000004f |
| error, the target event(s) is/are disabled but cannot clear them because the buffer of the user-mode priority is full | |
| #define | DEBUGGER_ERROR_NOT_ALL_CORES_ARE_LOCKED_FOR_APPLYING_INSTANT_EVENT 0xc0000050 |
| error, not all cores are locked (probably due to a race condition in HyperDbg) in instant-event mechanism | |
| #define | DEBUGGER_ERROR_TARGET_SWITCHING_CORE_IS_NOT_LOCKED 0xc0000051 |
| error, switching to the target core is not possible because core is not locked (probably due to a race condition in HyperDbg) | |
| #define | DEBUGGER_ERROR_INVALID_PHYSICAL_ADDRESS 0xc0000052 |
| error, invalid physical address | |
HyperDbg's SDK Error codes.
This file contains definitions of error codes used in HyperDbg
| #define DEBUGGER_ERROR_ACTION_BUFFER_SIZE_IS_ZERO 0xc0000002 |
error, the action buffer size is invalid
| #define DEBUGGER_ERROR_BREAKPOINT_ALREADY_DISABLED 0xc000001b |
error, breakpoint already disabled
| #define DEBUGGER_ERROR_BREAKPOINT_ALREADY_ENABLED 0xc000001c |
error, breakpoint already enabled
| #define DEBUGGER_ERROR_BREAKPOINT_ALREADY_EXISTS_ON_THE_ADDRESS 0xc0000019 |
error, breakpoint already exists on the target address
| #define DEBUGGER_ERROR_BREAKPOINT_ID_NOT_FOUND 0xc000001a |
error, breakpoint id not found
| #define DEBUGGER_ERROR_COULD_NOT_BUILD_THE_EPT_HOOK 0xc0000027 |
error, could not build the EPT Hook
| #define DEBUGGER_ERROR_COULD_NOT_FIND_ALLOCATION_TYPE 0xc0000028 |
error, could not find the type of allocation
| #define DEBUGGER_ERROR_COULD_NOT_FIND_PREACTIVATION_TYPE 0xc000004d |
error, could not find the type of preactivation
| #define DEBUGGER_ERROR_DEBUGGER_ALREADY_UHIDE 0xc000000a |
error, the debugger is already in transparent-mode
| #define DEBUGGER_ERROR_DETAILS_OR_SWITCH_PROCESS_INVALID_PARAMETER 0xc0000020 |
error, for process switch or process details, invalid parameter
| #define DEBUGGER_ERROR_DETAILS_OR_SWITCH_THREAD_INVALID_PARAMETER 0xc0000021 |
error, for thread switch or thread details, invalid parameter
| #define DEBUGGER_ERROR_EDIT_MEMORY_STATUS_INVALID_ADDRESS_BASED_ON_CURRENT_PROCESS 0xc000000c |
error, an invalid address is specified based on current cr3 in !e* or e* commands
| #define DEBUGGER_ERROR_EDIT_MEMORY_STATUS_INVALID_ADDRESS_BASED_ON_OTHER_PROCESS 0xc000000d |
error, an invalid address is specified based on anotehr process's cr3 in !e* or e* commands
| #define DEBUGGER_ERROR_EDIT_MEMORY_STATUS_INVALID_PARAMETER 0xc000000b |
error, invalid parameters in !e* e* commands
| #define DEBUGGER_ERROR_EPT_COULD_NOT_SPLIT_THE_LARGE_PAGE_TO_4KB_PAGES 0xc0000024 |
error, in the EPT handler, it could not split the 2MB pages to 512 entries of 4 KB pages
| #define DEBUGGER_ERROR_EPT_FAILED_TO_GET_PML1_ENTRY_OF_TARGET_ADDRESS 0xc0000025 |
error, failed to get PML1 entry of the target address
| #define DEBUGGER_ERROR_EPT_MULTIPLE_HOOKS_IN_A_SINGLE_PAGE 0xc0000026 |
error, multiple EPT Hooks or Monitors are applied on a single page
| #define DEBUGGER_ERROR_EVENT_IS_NOT_APPLIED 0xc000001f |
error, for event specific reasons the event is not applied
| #define DEBUGGER_ERROR_EVENT_TYPE_IS_INVALID 0xc0000003 |
error, the event type is unknown
| #define DEBUGGER_ERROR_EXCEPTION_INDEX_EXCEED_FIRST_32_ENTRIES 0xc0000007 |
error, the index is greater than 32 in !exception command
| #define DEBUGGER_ERROR_FUNCTIONS_FOR_INITIALIZING_PEB_ADDRESSES_ARE_NOT_INITIALIZED 0xc000002d |
error, the needed routines for debugging is not initialized
| #define DEBUGGER_ERROR_INSTANT_EVENT_ACTION_BIG_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000046 |
error, the big preallocated buffer not found (for action)
| #define DEBUGGER_ERROR_INSTANT_EVENT_ACTION_REGULAR_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000045 |
error, the regular preallocated buffer not found (for action)
| #define DEBUGGER_ERROR_INSTANT_EVENT_BIG_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000043 |
error, the big preallocated buffer not found
| #define DEBUGGER_ERROR_INSTANT_EVENT_BIG_REQUESTED_SAFE_BUFFER_NOT_FOUND 0xc000004a |
error, the requested safe buffer does not exists (big)
| #define DEBUGGER_ERROR_INSTANT_EVENT_PREALLOCATED_BUFFER_IS_NOT_ENOUGH_FOR_ACTION_BUFFER 0xc0000047 |
error, the preallocated buffer is not enough for storing action buffer
| #define DEBUGGER_ERROR_INSTANT_EVENT_PREALLOCATED_BUFFER_IS_NOT_ENOUGH_FOR_EVENT_AND_CONDITIONALS 0xc0000041 |
error, the preallocated buffer is not enough for storing event+conditional buffer
| #define DEBUGGER_ERROR_INSTANT_EVENT_PREALLOCATED_BUFFER_IS_NOT_ENOUGH_FOR_REQUESTED_SAFE_BUFFER 0xc000004b |
error, the preallocated buffer is not enough for storing safe requested buffer
| #define DEBUGGER_ERROR_INSTANT_EVENT_REGULAR_PREALLOCATED_BUFFER_NOT_FOUND 0xc0000042 |
error, the regular preallocated buffer not found
| #define DEBUGGER_ERROR_INSTANT_EVENT_REGULAR_REQUESTED_SAFE_BUFFER_NOT_FOUND 0xc0000049 |
error, the requested safe buffer does not exist (regular)
| #define DEBUGGER_ERROR_INSTANT_EVENT_REQUESTED_OPTIONAL_BUFFER_IS_BIGGER_THAN_DEBUGGERS_SEND_RECEIVE_STACK 0xc0000048 |
error, the requested optional buffer is bigger than send/receive stack of the debugger
| #define DEBUGGER_ERROR_INTERRUPT_INDEX_IS_NOT_VALID 0xc0000008 |
error, the index for !interrupt command is not between 32 to 256
| #define DEBUGGER_ERROR_INVALID_ACTION_TYPE 0xc0000001 |
error, invalid type of action
| #define DEBUGGER_ERROR_INVALID_ADDRESS 0xc0000005 |
error, invalid address specified for debugger
| #define DEBUGGER_ERROR_INVALID_CORE_ID 0xc0000006 |
error, the core id is invalid
| #define DEBUGGER_ERROR_INVALID_PHYSICAL_ADDRESS 0xc0000052 |
error, invalid physical address
| #define DEBUGGER_ERROR_INVALID_PROCESS_ID 0xc000001e |
error, the process id is invalid
| #define DEBUGGER_ERROR_INVALID_REGISTER_NUMBER 0xc0000017 |
error, invalid register number
| #define DEBUGGER_ERROR_INVALID_TEST_QUERY_INDEX 0xc0000029 |
error, could not find the index of test query
| #define DEBUGGER_ERROR_INVALID_THREAD_DEBUGGING_TOKEN 0xc0000030 |
error, invalid thread debugging token
| #define DEBUGGER_ERROR_MAXIMUM_BREAKPOINT_FOR_A_SINGLE_PAGE_IS_HIT 0xc0000022 |
error, maximum breakpoint for a single page is hit
| #define DEBUGGER_ERROR_MAXIMUM_BREAKPOINT_WITHOUT_CONTINUE 0xc0000018 |
error, maximum pools were used without continuing debuggee
| #define DEBUGGER_ERROR_MEMORY_TYPE_INVALID 0xc000001d |
error, memory type is invalid
| #define DEBUGGER_ERROR_MODE_EXECUTION_IS_INVALID 0xc000003f |
error, the execution mode is incorrect
| #define DEBUGGER_ERROR_MODIFY_EVENTS_INVALID_TAG 0xc000000e |
error, invalid tag for 'events' command (tag id is unknown for kernel)
| #define DEBUGGER_ERROR_MODIFY_EVENTS_INVALID_TYPE_OF_ACTION 0xc000000f |
error, type of action (enable/disable/clear) is wrong
| #define DEBUGGER_ERROR_NOT_ALL_CORES_ARE_LOCKED_FOR_APPLYING_INSTANT_EVENT 0xc0000050 |
error, not all cores are locked (probably due to a race condition in HyperDbg) in instant-event mechanism
| #define DEBUGGER_ERROR_PRE_ALLOCATED_BUFFER_IS_EMPTY 0xc0000023 |
error, there is no pre-allocated buffer
| #define DEBUGGER_ERROR_PREPARING_DEBUGGEE_INVALID_BAUDRATE 0xc0000012 |
error, baud rate is invalid
| #define DEBUGGER_ERROR_PREPARING_DEBUGGEE_INVALID_CORE_IN_REMOTE_DEBUGGE 0xc0000014 |
error, invalid core selected in changing core in remote debuggee
| #define DEBUGGER_ERROR_PREPARING_DEBUGGEE_INVALID_SERIAL_PORT 0xc0000013 |
error, serial port address is invalid
| #define DEBUGGER_ERROR_PREPARING_DEBUGGEE_TO_RUN_SCRIPT 0xc0000016 |
error, unable to run script in remote debuggee
| #define DEBUGGER_ERROR_PREPARING_DEBUGGEE_UNABLE_TO_SWITCH_TO_NEW_PROCESS 0xc0000015 |
error, invalid process selected in changing process in remote debuggee
| #define DEBUGGER_ERROR_PROCESS_ID_CANNOT_BE_SPECIFIED_WHILE_APPLYING_EVENT_FROM_VMX_ROOT_MODE 0xc0000040 |
error, the process id cannot be specified while the debugger is in VMX-root mode
| #define DEBUGGER_ERROR_READING_MEMORY_INVALID_PARAMETER 0xc000003c |
error, for reading from memory in case of invalid parameters
| #define DEBUGGER_ERROR_STEPPING_INVALID_PARAMETER 0xc0000010 |
error, invalid parameters steppings actions
| #define DEBUGGER_ERROR_STEPPINGS_EITHER_THREAD_NOT_FOUND_OR_DISABLED 0xc0000011 |
error, thread is invalid (not found) or disabled in stepping (step-in & step-out) requests
| #define DEBUGGER_ERROR_TAG_NOT_EXISTS 0xc0000000 |
error, the tag not exist
| #define DEBUGGER_ERROR_TARGET_SWITCHING_CORE_IS_NOT_LOCKED 0xc0000051 |
error, switching to the target core is not possible because core is not locked (probably due to a race condition in HyperDbg)
| #define DEBUGGER_ERROR_THE_MODE_EXEC_TRAP_IS_NOT_INITIALIZED 0xc000004e |
error, the mode exec trap is not already initialized
| #define DEBUGGER_ERROR_THE_TARGET_EVENT_IS_DISABLED_BUT_CANNOT_BE_CLEARED_PRIRITY_BUFFER_IS_FULL 0xc000004f |
error, the target event(s) is/are disabled but cannot clear them because the buffer of the user-mode priority is full
| #define DEBUGGER_ERROR_THE_TRAP_FLAG_LIST_IS_FULL 0xc000003d |
error, the list of threads/process trap flag is full
| #define DEBUGGER_ERROR_THE_USER_DEBUGGER_NOT_ATTACHED_TO_THE_PROCESS 0xc0000033 |
error, the user debugger is not attached to the target process
| #define DEBUGGER_ERROR_UNABLE_TO_ALLOCATE_REQUESTED_SAFE_BUFFER 0xc000004c |
error, enable to create requested safe buffer (cannot allocate buffer)
| #define DEBUGGER_ERROR_UNABLE_TO_ATTACH_TO_AN_ALREADY_ATTACHED_PROCESS 0xc0000032 |
error, user debugger already attached to this process
| #define DEBUGGER_ERROR_UNABLE_TO_ATTACH_TO_TARGET_USER_MODE_PROCESS 0xc000002a |
error, failed to attach to the target user-mode process
| #define DEBUGGER_ERROR_UNABLE_TO_CREATE_ACTION_CANNOT_ALLOCATE_BUFFER 0xc0000044 |
error, enable to create action (cannot allocate buffer)
| #define DEBUGGER_ERROR_UNABLE_TO_CREATE_EVENT 0xc0000004 |
error, enable to create event
| #define DEBUGGER_ERROR_UNABLE_TO_DETACH_AS_THERE_ARE_PAUSED_THREADS 0xc0000034 |
error, cannot detach from the process as there are paused threads
| #define DEBUGGER_ERROR_UNABLE_TO_DETECT_32_BIT_OR_64_BIT_PROCESS 0xc000002e |
error, unable to get 32-bit or 64-bit of the target process
| #define DEBUGGER_ERROR_UNABLE_TO_GET_CALLSTACK 0xc0000038 |
error, unable to get the callstack
| #define DEBUGGER_ERROR_UNABLE_TO_GET_MODULES_OF_THE_PROCESS 0xc0000037 |
error, unable to get modules
| #define DEBUGGER_ERROR_UNABLE_TO_HIDE_OR_UNHIDE_DEBUGGER 0xc0000009 |
error, unable to hide the debugger and enter to transparent-mode
| #define DEBUGGER_ERROR_UNABLE_TO_KILL_THE_PROCESS 0xc000002f |
error, unable to kill the target process
| #define DEBUGGER_ERROR_UNABLE_TO_KILL_THE_PROCESS_DOES_NOT_EXISTS 0xc000003e |
error, unable to kill the target process. process does not exists
| #define DEBUGGER_ERROR_UNABLE_TO_PAUSE_THE_PROCESS_THREADS 0xc0000031 |
error, unable to pause the process's threads
| #define DEBUGGER_ERROR_UNABLE_TO_QUERY_COUNT_OF_PROCESSES_OR_THREADS 0xc0000039 |
error, unable to query count of processes or threads
| #define DEBUGGER_ERROR_UNABLE_TO_REMOVE_HOOKS 0xc000002c |
error, could not remove the previous hook
| #define DEBUGGER_ERROR_UNABLE_TO_REMOVE_HOOKS_ENTRYPOINT_NOT_REACHED 0xc000002b |
error, failed to remove hooks as entrypoint is not reached yet
The caller of this functionality should keep sending the previous IOCTL until the hook is remove successfully
| #define DEBUGGER_ERROR_UNABLE_TO_SWITCH_PROCESS_ID_OR_THREAD_ID_IS_INVALID 0xc0000035 |
error, cannot switch to new thread as the process id or thread id is not found
| #define DEBUGGER_ERROR_UNABLE_TO_SWITCH_THERE_IS_NO_THREAD_ON_THE_PROCESS 0xc0000036 |
error, cannot switch to new thread the process doesn't contain an active thread
| #define DEBUGGER_ERROR_UNKNOWN_TEST_QUERY_RECEIVED 0xc000003b |
error, unknown test query is received
| #define DEBUGGER_ERROR_USING_SHORT_CIRCUITING_EVENT_WITH_POST_EVENT_MODE_IS_FORBIDDEDN 0xc000003a |
error, using short-circuiting event with post-event mode is not supported in HyperDbg
| #define DEBUGGER_OPERATION_WAS_SUCCESSFUL 0xFFFFFFFF |
General value to indicate that the operation or request was successful.
1.11.0